A: Our paint protection film is available in the following standard sizes:
– Width: 0.5m, 1.0m, 1.22m, 1.52m
– Length: 5m, 10m, 15m, 20m, 30m
We also provide customized size service to meet special needs.

A: We offer a variety of thickness options:
– 4 mil (0.1mm): for light protection
– 6 mil (0.15mm): most commonly used, suitable for most applications
– 8 mil (0.2mm): provides additional protection and is suitable for high wear areas
– 10 mil (0.25mm): Highest level of protection, suitable for extreme conditions

A: The choice of film thickness depends on the application area and the level of protection required:
– 4-6 mil is suitable for most areas of the body
– 8 mil is recommended for vulnerable areas such as front bumpers, hood leading edges, etc.
– 10 mil for off-road vehicles or vehicles that are frequently driven in harsh environments.

A: The area covered depends on the roll size. For example, a roll of 1.52m wide x 30m long film can cover approximately 45.6 square meters. However, the actual area to be covered will vary depending on the vehicle model, installation technique and amount of waste material.

A: The amount of material required for a full car cover varies depending on the size of the vehicle. Generally speaking:
– Small car: approximately 15-20 square meters
– Medium Vehicle: approximately 20-25 square meters
– Large car/SUV: approx. 25-35 square meters
It is recommended to prepare an additional 10-15% of materials for unforeseen circumstances.

A: Yes, we offer pre-cut kits for most common vehicle models. These kits are precisely cut to the dimensions of the specific vehicle and can significantly reduce installation time and material waste.

A: The following are approximate amounts for common areas:
– Front bumper: 1-2 square meters
– Hood: 2-4 square meters
– Front wing panels (each side): 0.5-1 square meter
– Side skirts (per side): 1-2 square meters
– Rear bumper: 1-2 square meters

Yes, our paint protection film can be cut into any shape as needed. It has good ductility and adaptability to fit complex curved surfaces.

A: For standard sizes, we usually have no minimum order quantity. However, for custom sizes, there may be a minimum order requirement depending on the complexity of the customization.

A: Yes, we offer small sized repair sheets, usually 20cm x 20cm or 30cm x 30cm, for localized repairs or small area protection.

A: Consider the following factors when selecting the width of the film:
– Width of vehicle components (e.g. hood, roof)
– Ease of installation (wider films may be more difficult to maneuver)
– Reduction of seams (selecting the proper width will reduce or avoid visible seams)

A: Our Paint Protection Film can be stored for up to 2 years under proper storage conditions (protected from light, at a constant temperature and in a dry environment). It is recommended that it be used within 12 months of purchase for optimum performance.

A: Yes, although primarily used on automobiles, our Paint Protection Film can also be used on other smooth surfaces that need protection, such as electronic equipment, furniture, boats, etc.

A: Although splicing is technically possible, we do not recommend it as the seams may affect the aesthetics and protection. It is recommended to use a single piece of membrane large enough to cover the entire area.

A: Yes, our paint protection films have excellent ductility and adaptability to fit the complex curves of most vehicles. However, for particularly complex shapes, specialized installation techniques may be required.